SST2200B and SST1700B are equipped with an integrated USB port and USB pen drive for recording and traceability of the cycles.

SST2200B and SST1700B control system is provided with different apps for the reduction of electricity consumption reduction.
Stand-by app will reduce the waste of electricity during non using phases.

 

SST2200B and SST1700B are equipped with a steam generator that, while assuring the best steam quality, reduces the amount of water used per cycle.

SST2200B and SST1700B are provided with a powerful vacuum pump that assures the performances of the air removal system through fractionated vacuum.

The P.I.D. control system assures the maximum accuracy and “Automatic Evaluation System” controls the achieving of the EN13060 requirements in every cycles.

 

Through the front panel, demineralized water can be automatically loaded and used water, collected in the separate tank, can be drained .

Sterilizers are provided with a system for the evaluation of the demineralized water quality and a connection for the direct feeding from an external demineralizer.

As requested by the EN13060, in case of poor water quality, the operator will be immediately advised by a message.

 

SST2200B and SST1700B are equipped with a powerful cooling system. Thanks to a double fan fresh air is always circulating into the chassis. This system prevents failures and damages caused by sterilizer overheating.

As we know that “clean device last longer”, SST2200B and SST1700B are equipped by an easy accessible filtration unit.

 

Cycle	Sterilization temperature	Holding time	Drying	Total time	Load
121-18 Delicate	121° C	18 min.	ECO/15/30 min.	(3Kg-ECO) 44 min.	Thermolabile products (rubber) pakaged or loose
134 Flash	134°C	4 min.	ECO/5/10 min.	(1.5Kg-ECO)20 min.	Single wrapped solids- quick cycle
134-4 Standard	134°C	4 min.	ECO/15/30 min.	(3Kg-ECO)31 min.	Wrapped solids, cables (turbines), textiles
134-20 Prion	134°C	20 min.	ECO/15/30 min.	(3Kg-ECO)47min.	Wrapped solids, cables (turbines), textiles
Bowie&Dick, Helix test	134°C	3.5 min.	-	(*)24 min.	Special performance test cycle
Air Leakage Test	-	15 min.	-	(*)22 min.	Special seal test cycle

 

NAME	SST1700B
DESCRIPTION	STEAM STERILIZER FRACTIONATED VACUUM WITH CLASS B CYCLES
HEIGHT (mm) approx.	460
WIDTH (mm) approx.	476
LENGHT (mm) approx.	619
WEIGHT (Kg)	54
CAPACITY (l)	17
MATERIAL	stainless steel AISI304 Plastic
CONTROL	Completely with microprocessor
MAX. ABSORBED POWER (W)	2050
FEEDING FREQUENCY (Hz)	50 / 60 hz
FEEDING VOLTAGE (V)	230
FEEDING CURRENT	9
NUMBER OF CYCLES	4+2 test
AIR FILTRATION	Mass produced
STERILIZING TEMPERATURE	121°C-134°C
TANK	2
DISPLAY	Graphic 5.7
MESSAGES LANGUAGE SELECTION	italian english deutsch Francais Espanol
USER'S INSTRUCTIONS	italian english deutsch Francais Espanol
DATER	Mass produced
INTELLIGENT AUTODIAGNOSTIC	Mass produced
SERIAL PORT	Mass produced
PRINTER ARRANGEMENT	Mass produced
CYCLE COUNTER	Mass produced
OPEN DOOR DIMENSIONS (mm)	1010
MAX. WEIGHT (Kg)	54
MAX. WEIGHT DISTRIBUTION (Total for 4 feet) ( N/m² )	123000
MIN. EMBEDDING DIMENSIONS (mm)	500x580x660
CHAMBER WIDTH (mm)	254
CHAMBER DEPTH (mm)	350
CHAMBER VOLUME (l)	17
SAFETY VALVE PRESSURE	2.5 Bar
LOADING TANK VOLUME (l)	3
UNLOADING TANK VOLUME (l)	3
RECOMMENDED WATER TYPE	DEMINERALIZZATA
MAX. WATER VOLUME USED PER CYCLE (l)	0.4
MAX. OPERATING ALTITUDE	2000 m
OPERATING ENVIRONMENT TEMPERATURE	5°C/40°C
MAX. RELATIVE HUMIDITY IN THE OPERATING ENVIRONMENT	80%-31°C
PACKING GROSS WEIGHT (Kg)	63
ACCESSORIES	art. 2181 Technical Sheet Thermic serial printer art. 3200051 Technical Sheet Tray extractor art. 3200065 Technical Sheet Pouches Holder